RV With The Tanners Install a GoPower! IC-2000 In Their Bighorn

By:  Jim & Melinda Tanner

7th Sep, 17


We installed a 2000 watt Go Power Inverter to go along with our 3 Trojan T-1275 batteries in our Bighorn, but after a while we felt the need for a more efficient converter. We also wanted to cut down all the extra wiring in the RV.

Go Power! IC-2000 was the answer! It's a 2000 watt pure sine wave inverter with a built-in converter/charger (100 amp) and built in transfer switch (Dual 50 amp). As an added bonus, it also comes with a battery temperature sensor and the remote display panel. Nice!?

The IC-2000-12 is capable of passing a full 50 amps of service to our Bighorn and there is NO need for a Sub-panel…how awesome is that!!

The IC-2000 has an interesting feature called "power share". In theory, this will allow us to combine the 2000 watts from the IC-2000 with our generator to start one of our air conditioners. Once the AC units have started, the power requirement drops significantly and will run on just the generator.

Watch our video below for more on this project.

Supplies used for this project:

Go Power IC-2000 -http://amzn.to/2xshuev

High Leverage Cable Cutter - http://amzn.to/2uCY5JH

6 Gauge / 4 Wire Cable for 50amp Wiring - http://amzn.to/2tADMrf

*A version of this article was originally published on www.rvwiththetanners.com. It is published here with permission. All opinions expressed are solely those of the author.*

Similar Articles on the Heartland Blog


Jim & Melinda Tanner

Jim & Melinda Tanner


www.rvwiththetanners.com

About Melinda and Jim......


We met at Oregon State University. Jim currently works in the high technology industry while Melinda works in Education. 


We have 2 boys and enjoy camping as a family and being in the outdoors.


Jim grew up in Oregon and Melinda, having moved from Virginia, has come to love the Pacific Northwest's vast outdoor/camping opportunities.